Lee Seng Heng: Personal Protection - Hand Protection


Prevention Of Skin Diseases At Work And In The Environment General Requirements Employers shall select and require employees to use appropriate hand protection when employee's hands are exposed to hazards such as those from skin absorption of harmful substances; severe cuts or lacerations; severe abrasions; punctures; chemical burns; thermal burns; and harmful temperature extremes. Selection Employers shall base the selection of the appropriate hand protection on an evaluation of the performance characteristics of the hand protection relative to the task(s) to be performed, conditions present, duration of use, and the hazards and potential hazards identified. Factors to consider when choosing Gloves Because of the wide variety of hand protection products available today, gloves can be matched to particular applications. Consider the following when assessing your glove needs:
Physical Conditions	-	Hazards to which the glove will be subjected such as chemical immersion, punctures, temperature extremes, and abrasion.
Chemical Resistance	-	Ability of the glove material to withstand chemical penetration. Check permeation guides to determine the level of protection required.
Product Protection	-	Need to protect products from outside contamination through contact with worker's hands.
Glove Design And Configuration	-	Strength, sensitivity, dexterity, finish and colour.


	Electricians Latex Insulating Gloves


Nitrile Synthetic Rubber Glove			Neoprene Rubber Glove - Flock Lined

	Brand: Polyco Model No: Nitri-Tech II Packing: 1 pair Size: 7 to 10			Brand: Polyco Model No: Duraprene III Packing: 1 pair Size: 6 to 10

Offers very good abrasion and puncture resistance, and protection against a wide range of chemicals including strong detergents, oils and certain solvents. Anatomically shaped ensuring comfort and reducing hand fatigue Slip resistant raised diamond pattern on palm of glove ensuring good grip in both wet and dry conditions Flock Lined Versions Soft cotton flock lining absorbs perspiration keeping hands cool. Easier to put on and take off Contains a fungicidal and bacteriostatic agent Meets the surface resistivity requirements of EN1149 part1: 1995 Length 31 cm			Offers excellent abrasion resistance Embossed diamond grip pattern affords high levels of grip for the user Flock Lined Cotton flock lining absorbs perspiration keeping hands cool. Easier to put on and take off Anatomically shaped for greater user comfort Length 32 cm


KleenGuard G80 Neoprene/Latex Chemical Resistant Gloves			Unsupported Butyl Chemical Resistant Gauntlets

	Brand: Kimberly Clark Model No: 9597287 Packing: 12 pairs/pkt Size: 9			Brand: Polyco Model No: Butochem Packing: 1 pair Size: 7.5 & 9.5

Substantial 25mil thickness provides durable barrier 13" length helps protect forearms as well as hands Textured fingers improve grip Cotton flock lining adds comfort			Highly flexible unsupported laboratory gloves offering excellent gas impermeability and ozone resistance Two thickness options for varying mechanical load Lightly powdered for easier donning and cleaning Beaded cuff to prevent chemical roll back Length 330mm, Thickness: 0.4mm, 0.6mm


Unsupported Viton/Polychoroprene Laminate Chemical Resistant Gauntlets			Nitra Disposable Glove

	Brand: Polyco Model No: Vitochem Packing: 1 pair Size: 7 & 9			Brand: Polyco Model No: Nitra Fine PF Packing: 100 each/box Size: 6 to 9

Produced using the specialist Viton® elastomer offering the gloves unparalleled resistance to Aromatic Hydrocarbons and Chlorinated Hydrocarbons A secondary layer of polychoroprene improves the mechanical resistance Highly flexible, lightly powdered for easier donning and cleaning Beaded cuff to prevent chemical roll back Length 330mm, Thickness: 0.4mm			Nitra Fine is designed to be extra hard wearing and is up to 50% stronger than standard nitrile disposable gloves Nitrile Synthetic rubber which offers much better puncture and abrasion resistance than natural rubber or vinyl Elastic material feels cooler and is comfortable and flexible to wear No latex proteins - eliminates protein skin sensitization Low particle count reduces risks of product contamination Where a beaded cuff is preferred Ambidextrous fits either hand Length 25cm, Thickness 0.10mm


Sol-Vex Gloves			Scorpio Gloves

	Brand: Ansell Model No: 37-165 22mils, 15" 37-175 15mils, 13" 37-185 22mils, 18" Packing: 12 pairs/pkt Size: 7 to 11			Brand: Ansell Model No: 8-352 12" 8-354 14" Packing: 12 pairs/pkt Size: 7 to 10

The "case-hardened" composition proved superior chemical resistance to many solvents Soft, cotton-flock lined for perspiration absorption, are highly resistant to abrasion, cuts, snags and punctures Broad line, large selection of lengths and thickness, multiple sizes and choice of flock lining Embossed and straight cuff			Broad spectrum protection resists a wide range of chemicals, including oils, acids, solvents and caustics Excellent dexterity interlock knit lining and flexible coating stretch to provide a snug fit, and allow easy on and off Two-piece lining eliminates seams from the working areas to prevent hand irritation and premature wear-thru Curved, preflexed fingers and wing thumb give extra working ease Dipped rough finish makes handling wet, slippery materials easier and safer


Neoprene Gloves			PVA Gloves

	Brand: Ansell Model No: 29-865 18mils, 13" Packing: 12 pairs/pkt Size: 7 to 11			Brand: Ansell Model No: 15-554 14" Packing: 12 pairs/pkt Size: 9

Broad-spectrum protection against abrasion, cuts, punctures, and a wide range of chemicals Available either smooth, or with embossed finish for better gripping Embossed flock lined and straight cuff			Resist against strong solvents including aromatics and chlorinated - the types which quickly deteriorate rubber, neoprene and PVC gloves PVA is nearly inert to these solvents Little absorption to cause swelling, and little extraction to cause shrinking Very comfortable, weighs only half as much as a neoprene coated gauntlet Interlock knit lined provides greater flexibility Caution: PVA coating is water soluble, do not use in water or water based solutions


Touch N Tuff Disposable Nitrile Gloves			Butyl II Rubber

	Brand: Ansell Model No: 92-500 lightly powered 92-600 powder-free Packing: 100 each/box Size: 8 & 9			Brand: Best Model No: 874R Packing: 1 pair Size: 9

High resistance to snags, nicks and abrasions Contains no fillers, additives or latex proteins Rolled cuff adds protection and strength 4 mil (0.004") thick, 9" long 100 pcs per box Choose between power-free or lightly powered styles			Superior resistance to highly corrosive acids Excellent handling ketones and esters Provides high permeation resistance to gases and vapours Provides the ultimate combination of protection and dexterity


Seamless Knitted Dyneema® Glove with Polyurethane Coating			100% Kevlar® Glove

	Brand: Polyco Model No: Dy Flex Packing: 1 pair/box Size: 6 to 10			Brand: Polyco Model No: Touchstone Packing: 1 pair Size: 7 to 10

The lightweight Dyneema® Glove provides excellent resistance to cut, abrasion and tear The seamless construction provides an exceptional level of comfort, whilst the open back style allows excellent breathability Glove has been designed to be tight fitting to give maximum dexterity for the most tactile of operations Elasticated for a snug fit			100% Kevlar® aramid fibre offers increased resistance to heat Kevlar® provides increased protection against cuts, slashes and abrasion, whilst maintaining a high degree of dexterity for the wearer Soft Kevlar® fibres offer the wearer reduced hand fatigue, allowing hands to breathe. The seamless construction will not irritate hands, even during long periods of wear Ambidextrous Mediumweight


Kevlar® Seamless Knitted Gloves with additional PVC dots			100% Kevlar® Sleeves

	Brand: Polyco Model No: Touchstone Grip Packing: 1 pair/box Size: 7 to 10			Brand: Polyco Model No: Touchstone Sleeves Packing: 1 pair Size: 18"

Kevlar® provides increased protection against cuts, slashes and abrasion, whilst maintaining a high degree of dexterity for the wearer Soft Kevlar® fibres offer the wearer reduced hand fatigue, allowing hands to breathe. The seamless construction will not irritate hands, even during long periods of wear Dot Coating Provides exceptional grip on all types of material in dry conditions Ambidextrous Mediumweight			Cut Resistant Kevlar® provides increased protection against cuts, slashes and tear, whilst maintaining a high degree of dexterity for the wearer Soft Kevlar® fibres seamless construction will not irritate arms, even during long periods of wear 100% Kevlar® aramid fibre offers increased resistance to heat Double ply Kevlar® Offers increased protection to the arm from cuts and abrasion.(Not loose sleeve version) Thumb slot ensures that the sleeve will not slip exposing the wrist or arm


Seamless Knitted Nylon Glove with Light Porous Breathable Nitrile Coating			Purple Nitrile Foam Coated Gloves

	Brand: Polyco Model No: Grip It Foam Packing: 1 pair Size: 6 to 10			Brand: Kimberly Clark Model No: 954022600 Packing: 1 pair Size: 8

The soft seamless knitted yarn provides an exceptional level of comfort, whilst the open back style allows excellent breathability The snug fit provides maximum dexterity for the most tactile of applications As well as providing excellent dry grip, Grip It Foam channels oils and liquids away from the surface ensuring superb wet grip			Seamless Knit Nylon shell gloves are foam coated with purple nitrile Excellent wet and dry grip Superior abrasion resistance and dexterity


100% Kevlar® Extra Heavyweight Gauntlet with a Heavyweight Cotton Inner Lining			Terry Cloth Gloves

	Brand: Polyco Model No: Volcano Packing: 1 pair Size: 11			Brand: Polyco Model No: Thermatex Packing: 1 pair Size: Free

Level 3 for contact heat, can withstand temperatures of 350°C Kevlar® provides increased protection against cuts, slashes and abrasion Provides exceptional protection against heat The knitted construction gives a degree of comfort, flexibility and dexterity not normally associated with such protection levels Available in 13 and 16 inch lengths to give extra protection to the arm			Superior quality 34oz heavyweight knitted loop-pile cotton gives a softer textured terrycloth Excellent insulation against heat, can withstand temperatures of 250°C Good abrasion, cut and tear resistance Cost effective Length: 32 cm


Heat Resistance Gloves			Aluminized Heat Resistance Gloves

	Brand: Heat Gard Model No: HRG-1 Packing: 1 pair Size: Free			Brand: Heat Gard Model No: HRG-2 Packing: 1 pair Size: Free

Leather back with Kevlar Palm Good cut and abrasion resistance Standard 14" length longer length available upon request			Aluminized back with thick leather Good insulation against high radiant heat during handling Standard 14" length Longer length available upon request


Cryo-Gloves			Seamless Knitted Shell with Anti-Vibration & Anti-Imapct Coating

	Brand: Tempshield Model No: MA mid-arm EB elbow Packing: 1 pair Size: M & L			Brand: Polyco Model No: Tremor-Low Packing: 1 pair Size: 8 to 10

Superior thermal protection Water resistant Comfortable / Lightweight / Excellent dexterity Breathable / Stay-dry lining Use in Ultra low and Blast freezers, Cold rooms , Dry ice handling Handles cryogenic material like liquid nitrogen Mid Arm and Elbow length available			The unique coating on the glove acts to reduce the effects of impact, shocks and vibration The soft knitted seamless liner is comfortable to wear over long periods of wear Unlike other anti-vibration and anti-impact gloves, Tremor Low allows the wearer great levels of dexterity The foamed coating provides excellent grip BSEN 10819: Protective Gloves Against Mechanical Vibration And Shock Length 26 cm


Goat Skin Gloves			Leather Welding Gloves

	Brand: General Model No: GSG-1 Packing: 12 pairs/pkt Size: Free			Brand: General Model No: LWG-1 Packing: 12 pairs/pkt Size: Free

Goat skin leather gloves Offers maximum durability and sensitivity			Green in color Good heat resistance 13" length


Cotton Gloves			Denim Working Gloves

	Brand: General Model No: CG-1 Packing: 12 pairs/pkt Size: Free			Brand: General Model No: DWG-1 Packing: 12 pairs/pkt Size: Free

9" length Various weights available Ambidextrous - Fit either hand			Short denim cuff Leather palm work glove with wing thumb